多德顿翱尝顿继电器模块技术技术Key data of the CANopen field bus systemBus topology: Line with short stubs Twisted pair line, shielded Typical line impedance: 120 Ω (equivalent to line termination). Note: Reflections on the line ends can be avoided by bus line termination on both ends with the bus line's characteristic impedance (120 Ω). Max. 32 nodes without repeater, with repeater up to 128 nodes Max. stub length: 30 cm Relation between baud rate and bus length: 5000 m at 50 kBaud; 10 m at 1000 kBaud
Line structureThe CANopen bus system is implemented as a line structure with bus terminations on both line ends. The use of shielded lines improves its electromagnetic immunity. Electromagnetic interferences can also be avoided by the use of optical fiber cables. However this variant is more expensive compared with shielded cables. Connection of optical fiber cables is via integrated or external opto-couplers.
The figure below shows an example of how to use the DOLD CANopen PLC IL 5504 MINIMASTER for distributon boards as well as further bus nodes for the CANopen field bus system. 
Bus connectionBus nodes can be looped in the bus line or connected to the bus line via a short stub (max. 30 cm). To identify bus nodes an address (node ID) is assigned to each of them. The figure below shows the basic structure of a typical CANopen node connection to a bus with DOLD-PLC IL 5504 MINIMASTER and output module IP 5503: 
广联有限公司是专门从原厂走货销售的，保证。我司主营德国IFM易福门授权（中国）销售处，德国易福门IFM,滨贵惭温度传感器,滨贵惭压力传感器,IFM流量传感器,滨贵惭电容式传感器,滨贵惭电感式传感器等价格合理，直接从工厂走货，货源稳定，可以自己进口报关。
本公司自成立以来与国外多个品牌厂家达成合作关系，并已在国外成立公司直接跟品牌厂家拿货，力求给国内客户朋友带来优价的*产物。与您共赢，是我们Z初的动力！ |
